Microsoft Word - UW46T7HW_EN

T7HW

English

TABLE OF

CONTENTS

TABLE OF CONTENTS

TABLE OF

CONTENTS

.................................................................

DIGITAL TELEVISION TRANSITION NOTICE

............................

ENERGY STAR

DISCLAIMER .....................................................

IMPORTANT

INFORMATION.......................................................

Warnings

..................................................................................

NOTICES

.................................................................................

FCC COMPLIANCE STATEMENT

..........................................

IMPORTANT SAFETY

INSTRUCTIONS .................................

Circuit

Overload........................................................................

Power Cord

Protection .............................................................

Ventilation.................................................................................

WARNINGS AND

PRECAUTIONS

..........................................

ANTENNA INSTALLATION

SAFETY.......................................

Lightning...................................................................................

Power

lines...............................................................................

CLEANING THE LED

TV .........................................................

Dolby License

Notice................................................................

Licensing and Patent

Information.............................................

PACKAGE

CONTENTS

..............................................................

CONTROL

PANEL......................................................................

TERMINALS

...............................................................................

REMOTE

CONTROL

..................................................................

REMOTE CONTROL

OPERATION

............................................

INSTALLING THE REMOTE CONTROL

BATTERIES ..........

REMOTE CONTROL TRANSMISSION

RANGE ...................

LED TV

BASE

.............................................................................

INSTALLING THE LED TV

BASE

..........................................

REMOVING THE LED TV BASE

...........................................

ANTENNA

CONNECTION..........................................................

OUTDOOR ANTENNA

CONNECTION..................................

CABLE TV (CTV/DTV)

CONNECTION

..................................

EXTERNAL DEVICE

CONNECTIONS

.......................................

English

TABLE OF CONTENTS

POWER

CONNECTION .............................................................

CONNECTING AC

POWER...................................................

INITIAL

SETUP ......................................................................

ANTENNA OR COAXIAL CABLE CONNECTION

SETUP ....

CABLE OR SATELLITE BOX CONNECTION SETUP

..........

OTHER INPUT SOURCE CONNECTION SETUP

................

WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/

SATELLITE

BOX....................................................................

BASIC

OPERATIONS.................................................................

TURNING THE POWER ON AND

OFF

.................................

ADJUSTING THE

VOLUME...................................................

CHANGING CHANNELS

.......................................................

SELECTING THE INPUT

SOURCE.......................................

ADJUSTING THE DISPLAY FORMAT

..................................

SETUP

MENUS

..........................................................................

SETUP MENU

OPERATION..................................................

PICTURE................................................................................

SOUND

..................................................................................

CHANNEL ..............................................................................

PARENTAL

CONTROL..........................................................

SETUP

...................................................................................

CHANNEL

..............................................................................

WALL MOUNT

OPTION .............................................................

WALL MOUNT INSTALLATION

REMINDERS ......................

TROUBLESHOOTING

................................................................

SPECIFICATIONS

......................................................................

English

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air

TV programming, with a suitable antenna, after the end of full-power analog TV

broadcasting in the United States on June 12, 2009. The nationwide switch to digital

television broadcasting will be complete on June 12, 2009, but your local television

stations may switch sooner. After the switch, analog-only television sets that receive

TV programming through an antenna will need a converter box to continue to receive

over-the-air TV. Watch your local stations to find out when they will turn off their

analog signal and switch to digital-only broadcasting.

For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see

www.DTV.gov. For information on the TV Converter program, and on government

coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call

the NTIA at 1-888-DTV-2009.

ENERGY STAR DISCLAIMER

This Westinghouse product has earned the ENERGY STAR

for meeting U.S.

Federal energy efficiency guidelines as set by the Department of Energy and

Environmental Protection agency. The ENERGY STAR

program exists to provide

energy saving guidelines and help promote energy efficient products and practices.

Changes to certain features, settings and functions of this TV can change and/or

increase its power consumption. Depending on how settings are changed, power

consumption may exceed the limits required for ENERGY STAR

qualification. This

Westinghouse TV will operate at optimal energy efficiency in “Home” mode.

English

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside.

Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective

earthing connection.

The lightning flash with arrowhead inside an equilateral

triangle symbol is intended to alert the user to the presence

of uninsulated dangerous voltage within the product's

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to

alert the user to related operating and maintenance instructions in

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injury, this apparatus must be securely attached to the floor/wall in

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily

accessible.

Always use the appropriate AC cord that is certified for your specific country.

Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control Act

English

IMPORTANT INFORMATION

NOTICES

Important Notices Concerning Power Cord Selection

The specific power cord for this LED TV is enclosed and has been selected

according to the country of destination. Use the enclosed power cord to prevent

electric shock. Observe the following guidelines if it is necessary to replace the

original cord set, or if there is no cord set enclosed. The female receptacle of the

cord set must meet IEC-60320 requirements and should look like Figure A1 below:

Figure A1

Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2),

UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table,

type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly

on the floor, only SJT type cord sets may be used. The cord set must be selected

according to the current rating for the LED TV. Consult the table below for the

selection criteria of power cords used in the United States and Canada.

Cord Type

Size of Conductor in Cord

Maximum Unit Current Rating

SJT

18 AWG

16 AWG

14 AWG

10 Amps

12 Amps

SVT

18 AWG

17 AWG

10 Amps

12 Amps

Figure a1

Figure a2

I-SHENG

SP-12N

E55943

125V

Detachable, Max. 4.5 m long, Min. 1.5 m long, Type SVT, SJT or SPT-2, No. 18

AWG/2C. One end terminates in NEMA 1-15P with min. 125 V ac, 2.0 A

min., or

NEMA 2-15P with min. 250 V ac, 2.0 A min., the other end with an

appliance coupler.

Figure a2-1

English

IMPORTANT INFORMATION

FCC COMPLIANCE STATEMENT

This equipment has been tested and complies with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and may cause

harmful interference to radio communications if not installed and used in accordance

with the instructions. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the LED TV and the receiver.

• Connect the LED TV to an outlet on a circuit separate from to which the

receiver is connected.

• If the interference persists even after performing the above measures,

consult the Westinghouse Service Center or an experienced radio/TV

technician for assistance.

FCC Warning

To assure continued FCC compliance, use a grounded power supply cord and the

provided shielded video interface cable with bonded ferrite cores. If a BNC cable is

used, use only a shielded BNC (5) cable. Also, any unauthorized changes or

modifications not expressly approved by the manufacturer will void the user's

authority to operate this device.

English

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Make sure to note and follow all warnings and instructions marked on the LED TV.

Observe the following safety instructions.

• Read these instructions.

• Keep these instructions.

• Read all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long

periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

English

IMPORTANT INFORMATION

Circuit Overload

Do not overload wall outlets, extension cords, or power strips. This can result in a fire

or electronic shock.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them. Periodically inspect the cords for

damage. Install the LED TV near a wall socket outlet where the power cord can be

readily accessed.

Ventilation

The slots and openings on the cabinet are provided for necessary ventilation. To

ensure reliable operation of the LED TV and to protect it from overheating, these

slots and openings must never be blocked or covered.

Never cover the slots and openings with a cloth or other materials.

Do not block the openings by placing the LED TV on a bed, sofa,

rug or other similar surface.

Do not place the LED TV in a built-in installation such as a

bookcase or a rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

English

IMPORTANT INFORMATION

WARNINGS AND PRECAUTIONS

• Do not orient the LED TV towards direct sunlight to reduce glare.

• If the LED TV will not be used for a long period of time, unplug the unit and

remove the batteries from the remote control.

• Avoid touching the display screen by hand or any object.

• Never remove the rear cover. The LED TV interior contains high-voltage

parts. You may be seriously injured if you touch them.

• Always handle the LED TV with caution when moving it.

• Do not install the LED TV in airtight compartments, or in areas where it can

be exposed to water or high temperature.

• Ensure that the area around the LED TV is clean and free of moisture.

• Do not place anything on the LED TV that can hinder heat dissipation.

• Do not place naked flame sources, such as lighted candles, on or near the

LED TV.

• Do not place anything on the LED TV that can cause liquid to splash on it

(e.g. flower vase).

• Do not place heavy objects on the LED TV, audio/video cables, or power

cord.

• If the LED TV emits smoke, abnormal noise, or a strange odor, immediately

turn it off and contact the Westinghouse Service Center by:

– Logging on to www.wde.com.

– Contacting the Westinghouse Customer Service at (800) 701-0680.

– E-mailing us at [email protected].

English

IMPORTANT INFORMATION

ANTENNA INSTALLATION SAFETY

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LED TV, be sure the

antenna or cable system is grounded to prevent voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides

information on proper grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Antenna Grounding According to the National

Electrical Code, ANSI/NFPA 70

Antenna lead in wir e

Grounding

clamps

Electric service

equipment

NEC: National Electrical Code

Antenna discharge unit

(NEC Section 810-20)

Grounding Conductors

(NEC Section 810-21)

Grounding clamps

Power service grounding

electrode system (NEC Art

250 part H)

Lightning

For added protection for the LED TV during a lightning storm, or

when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. DO NOT disconnect the antenna or the power cord during

a heavy storm—lightning may strike while you are holding the

cable cord, causing serious injury. Turn off the LED TV and wait for

the weather to improve.

Power lines

An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or

where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with them

might be fatal.

English

IMPORTANT INFORMATION

CLEANING THE LED TV

• Make sure the LED TV is turned off and the power cord is

disconnected from the power outlet.

• Never spray or pour any liquid directly onto the screen or the

case.

To clean the screen:

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other

particles.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1 Wipe the case with a soft, dry cloth.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then

wipe the surface.

Dolby License Notice

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are registered trademarks of Dolby Laboratories.

Licensing and Patent Information

This WESTINGHOUSE product may be covered by one or more U.S. and foreign

patents and patent applications. See http://westinghousedigital.com/compliance/ for

details.

English

PACKAGE CONTENTS

46” LED TV Unit

Remote Control (with 2x AAA batteries)

LED TV Base

User Ma

nual

Power C

Warranty Card

AC Ada

ter

Quick Connect Guide

Screws for Base

Screw for Base

English

CONTROL

PANEL

CONTROL PANEL

Item

Description

1. Power

Toggles the power on and off.

English

TERMINALS

A AUD IO IN VIDE O L IN R L OUT R

Item

Function

1. DC IN

Connects the AC to DC adapter from this outlet to a power

source

2. COAX OUT

Connects to an external analog audio receiver

3. HDMI1/2

Connects to an external AV device such as a VCR, DVD player,

set-top box, or game system.

4. VGA & Ypbpr IN

Connects to a computer or other device with a VGA or

Ypbpr output using a 15-pin VGA cable.

5. PC & Ypbpr

AUDIO

Connects to the audio out port of a computer or other device.

6. TV Tuner

Connects the LED TV to an antenna or cable service.

7. USB

For service only.

8. AV

Connect to an external AV device such as a VCR, DVD player,

set-top box, or game system.

9. LINE OUT

Connect to an analog audio output device.

REMOTE

CONTROL

REMOTE CONTROL

REMOTE CONTROL OPERATION

INSTALLING THE REMOTE CONTROL BATTERIES

CAUTIONS:

• Only use AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage, which

may pose a fire risk or lead to personal injury.

• Insert batteries according to the (+) and (-) markings. Inserting the batteries

incorrectly may result in cracking or leakage, which may pose a risk of fire or

lead to physical injury.

• Dispose of used batteries in accordance with local laws and regulations.

• Keep batteries away from children and pets.

• When the remote control will not to be used for an extended period, remove the

batteries.

1 Remove the battery cover.

2 Insert the batteries. Make sure the (+) and (–) marks on the

batteries match those inside the compartment.

3 Re-attach the battery cover.

REMOTE CONTROL TRANSMISSION RANGE

Transmission range depends upon the reception angle.

The range of coverage is 20° horizontal/vertical at a

distance of 10 feet from the LED TV.

English

LED TV

BASE

LED TV BASE

CAUTION:

The LED TV unit may be too heavy for one person to lift. If this is the case,

make sure to ask for assistance in handling the LED TV to prevent

physical injury and/or damage to the unit.

INSTALLING THE LED TV BASE

1 Open the LED TV carton box.

2 Remove the LED TV base.

3 Remove the plastic bag.

4 Remove the two top carton stabilizers from the LED TV.

5 Remove the protective plastic covering the LED TV.

6 Grasp the two sides of the LED TV and then pull it out of the carton box.

7 Remove the two bottom carton stabilizers from the LED TV.

8 Lay the LED TV on a clear, flat, and stable surface.

9 Align the base to the bottom side of the LED TV and use two M4*30 screws to

secure it.

10 Carefully orient the LED TV in an upright position.

11 Use one M5 x 16 screw to fix the stand base and LED TV on the desk.

Be sure to place the TV at a location (at least 75cm high)

English

LED TV BASE

REMOVING THE LED TV BASE

If you intend to repack the LED TV unit (for shipping or storage) or you want to

change the installation to a wall mount option, you must first remove the LED TV

base.

1 Turn off the LED TV and all connected devices.

2 Disconnect the power cord from the LED TV.

3 Disconnect all signal cables from the I/O port terminals.

4 Remove the M5 x 16 screw securing the base to the desk.

5 Lay the LED TV on a clear, flat, and stable surface.

M5 x 16

6 Remove the two M4*30 screws securing the base to the LED TV.

7 Detach the base from LED TV.

8 Pack the screws you removed in step 5 together with the LED TV base for

future reassembly.

M4 x 30 x 2

English

ANTENNA CONNECTION

OUTDOOR ANTENNA CONNECTION

Cable TV lead in

VHF, UHF or VHF/UHF

combination antenna

75 ohm coaxial cable (round)

300 ohm twin-lead (flat)

300-75 ohm ADAPTER

(Not supplied)

RF IN

Separate VHF/UHF Antenna

VHF Antenna UHF Antenna

300 ohm

twin-l

ead COMB

(Not supplied)

Home Antenna

terminal (75 ohm)

300 ohm twin-lead

75 ohm coaxial cable

IN OUT

NOTE:

The F-type connector should be finger-tightened only.

When connecting the RF cable to the LED TV, do not

tighten F-type connector with any tool. If tools are used,

it may cause damage to the LED TV (e.g. breaking of

internal circuit).

CABLE TV (CTV/DTV) CONNECTION

The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O

panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit,

screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium

pay channels. Since the signals of these channels are scrambled, a cable TV

converter/descrambler is usually provided to the subscriber by the cable TV

company. This converter/descrambler is necessary for normal viewing of the

scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels

is used. If a channel is unknown, consult your cable TV company.) For more specific

instructions on installing cable TV, consult your cable TV company. One possible

method of utilizing the converter/descrambler provided by your cable TV company is

explained below.

EXTERNAL DEVICE CONNECTIONS

• A position on the RF switch (not supplied) – You can view all unscrambled

channels by using the TV's channel keys.

• B position on the RF switch (not supplied) – You can view the scrambled

channels via the converter/descrambler by using the converter's channel keys.

EXTERNAL DEVICE CONNECTIONS

IMPORTANT:

• Turn off the LED TV first before connecting an external device to prevent any

possible damage or physical injury.

• For more information about external device connections, see the operation

manual of the external device you wish to connect to the LED TV.

• Make sure that the correct cables are connected to each terminal. Improper

cable connections may cause damage to the LED TV.

You can enjoy picture and sound by connecting various audio-video devices to the

terminals located on the rear and side I/O panels of the LED TV.

• TV cable input – You can use a commercially available audio/video cable.

• Component (YPbPr) input – Picture can be displayed only when a 480i, 480P,

720P, 1080i, or 1080P signal is received.

• HDMI input – Picture can be displayed only when a 480i, 480P, 720P, 1080i, or

1080P signal is received. When you connect to the HDMI terminal with a DVI-

HDMI conversion cable, there is a possibility that the picture may not display

correctly.

• Audio output – You can output audio signals from the LED TV set through the

analog audio out and SPDIF terminals.

EXTERNAL DEVICE CONNECTIONS

The following diagram shows the external device connections.

outl

AC to DC adapter

Antenna

cable / Cable

TV line

Audio

ble

Audio out

VGA

Audio

amplifier

cabl

outl

3.5 mm

ster

mini

nna

able

Cable TV line

ite

cable

DVI

cable

DVI

cable

ayer w

HDMI terminal

wit

DVI terminal

Audio out

Audio

ble

igi

tun

VCR

Cam

Hom

game system

POWER CONNECTION

CONNECTING AC POWER

IMPORTANT:

The LED TV is designed to be powered via an AC adapter. Use ONLY the

AC adapter included in the package. Turn off all connected devices before

plugging the AC adapter into the power outlet.

Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet.

INITIAL SETUP

Press on the control panel or on the remote control to turn on the LED TV. Select

the desired language and select Yes to use the SetupWizard. The SetupWizard will

guide you on how to set up the LED TV’s operational settings.

English

POWER

CONNECTION

ANTENNA OR COAXIAL CABLE CONNECTION SETUP

Select Language

Use remote control to select the language

to be used for menus and messages. Press

SELECT to continue.

Time Zone

Use remote control to select your local time

zone. Select “Next” and then press SELECT

to continue. Press Go Back to return to the

previous screen.

Power On Mode

Use remote control to select the power on

mode. Select “Home” and then press

SELECT to continue. Press Go Back to return

to the previous screen.

Let’s Get Connected

Select “Antenna or coaxial cable input” and

press SELECT on your remote control to start

scanning channels. Press Go Back to return to

the previous screen.

English

POWER CONNECTION

Select Channel Scan Type

Use remote control to select the channel

scan type. Press SELECT to continue.

Press Go Back to return to the previous

screen.

NOTE: Antenna users selecting to scan Over-

the-Air ATSC channels need a Channel

Access Code in order to perform a channel

scan and receive broadcast signals.

For Antenna [ATSC] only: Antenna [ATSC]

Channel Access

Select “Next” and then press SELECT to

continue. Press Go Back to return to the

previous screen.

Antenna Channel Access Information

Take note of the channel access information.

Select “Next” and then press SELECT to

continue. Press Go Back to return to the

previous screen.

Enter Channel Access Code

Use the number keys on the remote control to

enter the channel access code. Press

SELECT to continue. Press Go Back to return

to the previous screen.

English

POWER

CONNECTION

Channel Scan in progress

The channel scan may take a while to complete.

When the scan is complete, you will be able to

watch your local TV programming.

English

POWER CONNECTION

CABLE OR SATELLITE BOX CONNECTION SETUP

Select Language

Use remote control to select the language to be

used for menus and messages. Press SELECT

to continue.

Time Zone

Use remote control to select your local time

zone. Press SELECT to continue. Press Go

Back to return to the previous screen.

Power On Mode

Use remote control to select the power on

mode. Press SELECT to continue. Press Go

Back to return to the previous screen.

Channel Scan - Cable/Satellite Box

Select “Click here to connect a Cable Box or

Satellite Box.” and press SELECT on your

remote control to start scanning channels.

Press SELECT to continue. Press Go Back to

return to the previous screen.

English

POWER

CONNECTION

Cable/Satellite Box Input

Use remote control to select the input

connected to the set top box. Press SELECT

to continue. Press Go Back to return to the

previous screen.

RF Warning

Use the up and down arrows on your HDTV

control panel or remote control to select. Select

“Proceed” and then press SELECT to search

the program. Press Go Back to return to the

previous screen.

English

POWER CONNECTION

OTHER INPUT SOURCE CONNECTION SETUP

Select Language

Use remote control to select the language

to be used for menus and messages.

Press SELECT to continue.

Time Zone

Use remote control to select your local

time

zone. Press SELECT to continue. Press

Go Back to return to the previous screen.

Power On Mode

Use remote control to select the power on

mode. Press SELECT to continue. Press

Go Back to return to the previous screen.

Let’s Get Connected

Select “Click here to connect a Game,

Blu-Ray, DVD, or other player.” and press

SELECT on your remote control. Press

SELECT to continue. Press Go Back to

return to the previous screen.

English

POWER

CONNECTION

Select Input Source

Use remote control to select the input

source. Press SELECT to continue. Press

Go Back to return to the previous screen.

English

POWER CONNECTION

WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/

SATELLITE BOX

Select Language

Use remote control to select the language

to be used for menus and messages.

Press SELECT to continue.

Time Zone

Use remote control to select your local

time

zone. Press SELECT to continue. Press

Go Back to return to the previous screen.

Power On Mode

Use remote control to select the power on

mode. Press SELECT to continue. Press

Go Back to return to the previous screen.

English

POWER

CONNECTION

Let’s Get Connected

Select “Click here to connect a Game,

Blu-Ray, DVD, or other player.” and press

SELECT on your remote control. Press

SELECT to continue. Press Go Back to

return to the previous screen.

Select Input Source

Use the keys on your remote control

to select the input source. Press SELECT

to continue.

English

BASIC OPERATIONS

URNING THE POWER ON AND OFF

Turning on the power

Press on the control panel or on the remote control to turn on the LED TV.

Turning off

the

power

Press on the control panel or on the remote control to turn off the LED TV. The

LED behavior will depend on the enabled Power settings.

NOTES:

• If you are not going to use the TV for a long time, be sure to disconnect the

power cord from the wall outlet and remove the batteries from the remote

control.

• In standby mode, a small amount of electricity is still consumed even when the

power is turned off.

ADJUSTING THE VOLUME

Vo lu

Mute

Volume

Press Vol+ to increase the volume; press Vol- to

decrease the volume.

Mute

Press to turn off the sound. The mute icon appears

on the screen. Press again to turn on the sound.

LED indicator

Operation

Turns from none to red.

Turn the power on.

Turns from red to none.

Turn the power off.

English

BASIC

OPERATIONS

CHANGING CHANNELS

Follow the instructions below to change channels.

Using the Ch

Buttons

Browse channels

To browse through the available channels, press Ch on

the remote control or on the control panel.

Using the Channel Keys

Selecting channel

To change to a certain channel, key in the channel number using

the channel keys and press ENT.

Selecting digital channel

To select a digital channel, key in the digital channel number using

the channel keys and the • key, then press ENT.

Using the Favorite Keys

Select

ing

favorite

channels

To select a favorite channel, press the Favorite button (A, B, C, or

D) corresponding to the preferred channel.

Saving a channel as a favorite

1 Switch to the channel you want to add as a favorite.

2 Press and hold the Favorite button which you want to add

the current channel to for 3 seconds.

3 The Channel Saved message appears to confirm the new

favorite channel item.

SELECTING THE INPUT SOURCE

There are two ways to select the video input source.

Using the Individual Input Keys

TV, VGA, Video, YPbPr, HDMI Keys

Press any of the following remote control keys to change the input

source: TV, VGA, Video1, YPbPr1, HDMI1, or HDMI2.

English

BASIC OPERATIONS

Using the Input Key

Select source using Input Key

1 Press Input.

2 A list of supported video sources is displayed.

3 Press / to select the preferred source.

4 Press to switch to the selected input source.

ADJUSTING THE DISPLAY FORMAT

The input source can sometimes affect the way images are displayed on-screen.

You can adjust the display format to view the image properly.

Format Options

Press repeatedly to toggle the display format. As you toggle

each option on, the actual display will change accordingly. The

available options are:

• Standard: Picture is displayed in its original size.

• Fill: Picture is displayed to cover the entire screen.

• Overscan: Picture is scaled up to fit the display area.

English

H D MI 1

H D MI 2

S P D I F

U S B

SETUP

MENUS

SETUP MENUS

SETUP MENU OPERATION

Use the setup menus to configure the various operational settings of the LED TV.

Displaying the setup menu screen

Press on the remote control or MENU on the control panel to display the setup

menu screen.

Navigating the setup menu screen

Use the buttons on the remote control or on the control panel to navigate through

the menu screens.

SETUP MENUS

PICTURE

Use the Picture sub-menus to configure the display quality.

Press on the remote control to display the setup menu screen then select

Picture to display the Picture sub-menu. The following options are available:

Picture Mode, Sound, Time, Setup, Lock, Channel.

Picture Settings

Adjust the picture quality including brightness, contrast, color, tint, sharpness.

SETUP

MENUS

Picture mode

Use this sub-menu to select one of four preset view options optimized for different

viewing conditions.

The following options are available:

• Energy Star: Select for power saving picture.

• Retail: Select for enhanced picture contrast and sharpness

• Movie: Select for a finely detailed picture.

• User: Select for standard picture.

Brightness

Use Brightness to adjust the luminance level.

Adjusting Brightness

1 Use the keys to select Brightness and press .

2 Press the keys on the remote control to adjust the brightness level.

3 Press to save and exit the screen.

Contrast

Use Contrast to adjust the brightness to darkness ratio.

Adjusting Contrast

1 Use the keys to select Contrast and press .

2 Press the keys on the remote control to adjust the contrast level.

3 Press to save and exit the screen.

English

SETUP MENUS

Color

Use Color to adjust the color intensity.

Adjusting Color

1 Use the keys to select Color and press .

2 Press the keys on the remote control to adjust the Color level.

3 Press to save and exit the screen.

Tint

Use Hue to adjust the balance of the red, green, and blue colors in the display.

Adjusting Tint

The following options are available:

1 Use the keys to select Tint and press .

2 Press the Keys on the remote control to adjust the Tint level.

3 Press to save and exit the screen.

Sharpness

Use Sharpness to adjust the sharpness or softness of the display.

Adjusting Sharpness

1 Use the eys to select Sharpness and press .

2 Press the keys on the remote control to adjust the sharpness

level.

3 Press to save and exit the screen.

English

SETUP

MENUS

Advanced Settings

Press / to selet the display aspect ratio till the picture is fit onto the screen.

The options are different according to different input source.

• Use the keys to select Noise Reduction, Press to select Low

Medium and High

• Use the keys to select Dynamic Contrast, Press to select on or

off

• Use the keys to select HDMI Mode, Press to select Video or

Graphic

• Use the keys to select Color Space, Press SELECT to enter Color Mode,

Color, Hue, Saturation, Brightness, Reset , adjust the TV setting.

• Use the keys to select White Balance, Press SELECT to enter Red Gain,

Green Gain, Blue Gain, Red Gain, Green Offset, Blue Offset, or Reset, adjust the

TV setting.

• Press

to save and exit the screen.

English

SETUP MENUS

SOUND

Use the Sound sub-menus to configure the sound quality.

Press on the remote control to display the setup menu screen then select

Sound to display the Sound sub-menu. The following options are available:

Equalizer, MTS, Audio Language, Digital Audio Output, AVL, Surround HD.

Equalizer

Use this sub-menu to select one of four preset audio options optimized for

different sounding conditions.

The following options are available:

• Standard: Select for standard sound.

• Music: Select for POP sound.

• Movie: Select for harmonious sound.

• Sports: Select for rhythm sound.

• User: Select for customized sound.

English

SETUP

MENUS

MTS

The following options are available:

• Mono: Allows mono output (useful when stereo is noisy or inconsistent).

• Stereo: Allows stereo sound for superior TV viewing experience.

• SAP: Allows second audio program from the speakers while watching a scene

in the original program.

Adjusting MTS

1 Use the / Keys to select MTS and press

2 Press the keys on the remote control to select the desired option.

3 Press to save and exit the screen.

Digital Audio Output (PCM/Raw/Off)

Set the audio output type of coax or optical terminal. Raw means output the original

format of audio stream. PCM can be matched with most AV amplifiers.

AVL (On/Off)

Automatic volume control

Surround sound HD (On/Off)

SETUP MENUS

Time

Use the Time sub-menus to configure the Time setting.

Sleep Timer

The following options are available:

• Sleep timer: Off/ 5 min / 10 min / 15 min / 30 min / 60 min / 90 min / 120 min /

180 min/ 240 min/ .

Adjusting Time

1 Use the / Keys to select Time and press

2 Press the keys on the remote control to select the desired option.

3 Press to save and exit the screen.

Time Zone

The following options are available:

• Time Zone: Pacific/ Alaska / Hawaii/ Samoa / Newfoundland / Atlantic /

Eastern / Central / Mountain

Adjusting Time

1 Use the / Keys to select Time Zone and press

2 Press the keys on the remote control to select the desired option.

3 Press to save and exit the screen.

SETUP MENUS

Daylight Saving Time

1 Use the / Keys to select Daylight Saving Time and press

2 Press repeatedly to check(enable) or uncheck(disable) Adjust for

Daylight Saving Time.

3 Press to save and exit the screen.

Time Format (12-hour/ 24-hour)

Auto Clock (On/Off)

If set it to On , the TV will sync the local clock according to the DTV

broadcasting time automatically. Otherwise you can set the time manually.

If set Auto Clock to Off, then you can set the time manually .

Clock (Clock/AM/PM)

SETUP MENUS

Sutup

Use the Settings sub-menus to configure the LED TV operational setup and view

the current firmware version.

Press on the remote control to display the setup menu screen then select

Setup to display the Settings sub-menu. The following options are available:

Menu Language, OSD Timeout, Closed Caption, Other Settings, Restore Default.

Menu Language

Use Menu Language to select the language to display on the screen:

English, French, or Spanish.

Adjusting Menu Language

1 Use the keys to select Menu Language and press .

2 Press the keys on the remote control to select English, French or

Spanish.

3 Press to save and exit the screen.

OSD Timout

Use OSD Timeout to adjust the OSD duration on the screen: 5 sec, 15 sec, 30

sec, or 45 sec, 60 sec .

SETUP MENUS

Adjusting OSD

meout

1 Use the keys to select OSD Timeout and press.

2 Press the keys on the remote control to select 5 sec, 15 sec,

30 sec, or 45 sec, 60 sec.

3 Press to save and exit the screen.

Closed Captions

Use Closed Captions to configure the settings for closed captioning in TV programs.

• CC Mode

Display or hide the CC.

• Analog CC

Select from below closed-caption modes for analog programs.

CC1,2,3,4: Displays corresponding caption channel of a analog program.

(Usually be set to CC1 for most programs).

Text1,2,3,4: Displays corresponding text service channel of a analog program.

SETUP MENUS

• Digital CC

Applies only to digital channels with closed caption.

Service1,2,3,4,5,6: These are different service data

channels.

• Option

The following options are available:

– Mode: Can be set to Default or Custom.

– Font Style: Can be set to as Default, Font 1, Font 2, Font 3, Font 4, Font

5, Font 6, or Font 7, Font 0.

– Font Size: Can be set to As Default, Small, Medium, or Large.

– Font Edgy Style: Left Shadow, Right Shadow, Default, None, Raised,

Depressed, Uniform.

– Font Edgy Color: Red, Black, White, Green, Blue, Yellow, Magenta,

cyan, Default

– FG Color: Default, White, Red, Green, Blue, Yellow, Magenta, cyan

– BG Color: Default, Black, White, Red, Blue, Yellow, Magenta, cyan,

Transparent

– FG Opacity: Default, Solid, flashing, Transparent

– BG Opacity: Can be set to as Default, Solid, Translucent,

Transparent, or Flashing.

SETUP MENUS

Adjusting Closed Captions Settings

1 Use the keys to select Closed Captions and press .

2 Use the keys to select the desired Closed Captions option.

3 Use the keys to adjust the value.

4 Press to save and exit the screen.

VGA Settings

Use VGA Settings to configure the settings for closed captioning in TV programs.

Auto

Automatically adjust Clock, Phase, H-Position and V-Position settings.

In order to get a good result, you should open a “filling the screen” picture before

executing Auto Adjust.

H. Position

Shift the screen horizontal slightly to left or right.

V. Position

Shift the screen vertical slightly up or down.

Clock

Adjust the DB15 picture signal sampling clock rate.

SETUP MENUS

Other Settings

Use Other Settings to configure the settings for audio On/Off in TV programs.

1 Use the keys to select Other Settings and press .

2 Press the keys on the remote control to adjust the Audio on/off.

3 F or Audio Onl y On/Off

Restore Default

1 Use the keys to select Restore Default and press

SETUP MENUS

Lock

Press to select the source you want to lock, then press SELECT to set it to

lock. If anyone want to use this source, the password is needed.

Change Password

Change Password allows you to change your current password.

The following options are available:

• Enter Old Password.

• Enter New Password.

• Confirm Password

English

SETUP MENUS

Changing Password

1 Use the / keys to select Change Password and press .

2 Use the Channel keys to enter the current password and press .

3 Use the Channel keys to enter the new password and press .

4 Use the Channel keys to enter the new password again for confirmation

and press .

5 Press to save and exit the screen.

System Lock (On/Off)

Input Block

Press to select the source you want to lock, then press SELECT to set it to

lock. If anyone want to use this source, the password is needed.

• TV

(Unblock/Block)

• AV

(Unblock/Block)

• Component

(Unblock/Block)

• HDMI

(Unblock/Block)

• VGA

(Unblock/Block)

SETUP MENUS

Changing Input Block

1 Use the / keys to select Input Source and press.

2 Use the / keys to select Unblock/Block and press

3 Press to save and exit the screen.

US Rating

Rating system used at USA.

– TV Rating: Use this sub-menu to customize US TV Rating programs.

Rating

Description

TV-Y

Suitable for young children.

TV-Y7

May not be suitable for children under 7.

TV-G

Suitable for all audiences.

TV-PG

Parental guidance suggested.

TV-14

Parental guidance suggested for children under 14.

TV-MA

Suitable for mature audiences only; may be unsuitable for children

under 17.

Fantasy violence, combative situations.

Suggestive dialogue.

L Coarse language.

Sexual situations.

Violence.

English

SETUP

MENUS

– MPAA: Use this sub-menu to select the ratings of allowable movies.

Rating

Description

Off

Contains nothing most parents will consider offensive

for even their youngest children to see or hear;

suitable for young children.

May contain some material parents might not like to

expose to their young children-material that will

clearly need to be examined or inquired about before

children are allowed to view the film.

PG-13

May contain some scenes of drug use; use of one of

the harsher sexually-derived words may be heard.

May be inappropriate for preteens.

May contain some adult material. Parents are urged

to learn more about the film before letting their

children view it.

NC-17

May contain explicit sex scenes, an accumulation of

sexually-oriented language, and/or scenes of

excessive violence. Suitable for adult audiences only.

Rating does not signify that the film is obscene or

pornographic.

Contains extreme violence or explicit sex; suitable for

adult audiences only.

English

SETUP MENUS

• Canada Rating

Rating system used at Canada.

– Canada English: Use this sub-menu to select the classification categories

(based on Canadian ratings) of allowable TV programs and movies.

SETUP

MENUS

Rating

Description

Off

Suitable for viewing by children of all ages.

C8+

Not suitable for children under 8 years of age.

Suitable for general audiences.

Parental guidance advised.

14+

Suitable for people 14 years of age or older.

18+

Suitable for people 18 years of age or older.

– Canada French: Use this sub-menu to select the ratings of allowable

TV programs and movies. These ratings are based on the

classification categories determined by La Régie du cinéma du

Québec.

Rating

Description

Off

For general audiences.

8 ans +

Not suitable for children under 8 years of age.

13 ans+

Not suitable for persons under 13 years of age.

16 ans+

Not suitable for persons under 16 years of age.

18 ans+

Not suitable for persons under 18 years of age.

SETUP

MENUS

CHANNEL

Use the Channel sub-menus to configure the channel.

Press on the remote control to display the setup menu screen then select

Channel to display the Channel sub-menu. The following options are available:

Signal Type, Auto Scan, Favorite, Channel List, Show/Hide, Channel Number,

Channel Label.

NOTE: The menu is available only at TV source.

Signal Type

Set to Air or Cable according to your antenna source. When set to Air, TV can

Catch 8VSB broadcasting signal. When set to Cable, TV can catch analog and

clear 64QAM/256QAM broadcasting signal.

SETUP

MENUS

Auto Scan

Select Auto Scan and press ENT. Two options are available:

• Are you sure to auto Scan?

• No.

Auto Search automatically creates a list of receivable channels for the

selected source.

Favorite List

The following options are available: Channel, Channel Label, Favorite, Prev, Next.

All of your favorite channels are listed in this menu, and you can choose them

quickly.

SETUP

MENUS

Channel List

The following options are available: Press change Channel, Channel Label,

Prev, Next.

You can view all the channels and choose one quickly.

"CH-1": Label of the Channel

Show/Hide

The following options are available: Channel, Channel Label, Hide, Prev, Next.

SETUP

MENUS

Channel Number

The TV screen shows current TV channel.

Channel Label

Rename label of the channel.

WALL MOUNT OPTION

The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These

200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four

M6 x L12 mm screws to wall mount the LED TV.

WALL MOUNT INSTALLATION REMINDERS

• Remove the LED TV base first before mounting the unit on a wall.

• It is the user's responsibility to use a UL listed wall mount unit rated to support the

weight of this LED TV.

• Please consult qualified contractors for wall mount installation.

CAUTION:

The incomplete or improper mounting of this unit to a wall may cause it to fall down

resulting to property damage and/or potentially serious injury.

English

TROUBLESHOOTING

Problem

Corrective Action

No power

• Make sure the power indicator is illuminated

blue.

• Make sure the power cord is securely connected

to the AC-in jack and is plugged into a functional

AC outlet. You may want to plug in another

electrical device to the power outlet to verify that

it is supplying the proper voltage.

Power is suddenly turned

off.

Make sure the sleep timer is turned off.

Remote control does not

work.

• Press only one button at a time.

• Make sure the batteries are properly inserted.

• The batteries may already be drained out.

Replace batteries with new ones.

Remote control code

cannot be detected by a

universal remote.

• Purchase a separate learning remote control.

• Go to www.wde.com for a list of remote codes.

No picture

• Make sure the video input cable is properly

connected to the correct terminal, and that the

correct input mode is enabled. To illustrate, when

a VGA cable is connected to display a computer

screen, the VGA input mode must be enabled.

• Verify that the antenna is properly connected

and that the preferred channel is enabled in the

channel list. Press and select Channels/Channel

List.

• Adjust the display settings.

No picture or the No Signal

message appears when a

VGA cable is connected.

• Make sure the VGA cable is properly connected

to the LED TV’s VGA port.

• Decrease the video resolution setting on the

computer and try again.

• Adjust the display settings.

English

TROUBLESHOOTING

Problem

Corrective Action

Picture is cut off or appear

in a sidebar screen.

Press to adjust the Aspect ratio.

Poor image quality in TV

mode (cutoff picture, snowy

images).

• Check your antenna connection. If necessary,

rotate the antenna and wait up to ten seconds for

a signal.

• Reduce signal splitters and excessively long

cables.

• Replace poor antenna cables and/or connectors

to improve signal quality.

• Press to adjust the Aspect ratio.

• Adjust the Noise Reduction setting in Picture

menu.

• In HDMI mode, make sure the external device is

compatible with the LED TV.

Wrong, abnormal or

missing colors

• If any colors (red, green or blue) are missing,

check the video cable to make sure it is securely

connected. Loose or broken pins in the cable

connector could cause an improper connection.

• Adjust the Hue, Saturation and Color

Temperature settings in Picture menu.

• Connect the TV to another computer and check

if the problem is with the computer screen.

No sound

• Make sure the audio input cable is properly

connected to the correct terminal, and that the

correct input mode is enabled.

• The volume may be muted, press or Vol+ key to

turn on the volume.

• Adjust the Bass, Treble, and Balance settings in

Audio menu.

• If you are using the TV speakers, make sure the

TV Speakers option is set to On in Audio menu.

• If you are using an external audio device, press

and select Audio to make sure the TV Speakers

option is set to Off in Audio menu.

English

TROUBLESHOOTING

Problem Corrective Action

NOTES:

If the problem condition persists even after performing the recommended

corrective actions, contact us by:

• Logging on to www.wde.com

• Contacting the Westinghouse Customer Service at (800) 701-0680 or e-mail

us at [email protected]

English

SPECIFICATIONS

Item

Specification

Model Name

UW46T7HW

Active Area

(Diagonal, mm)

1054.08 (H) x 592.92 (V)

Resolution

1,920x1,080

Contrast Ratio (min)

4000:1 (typ.)

Response Time

(min)

6.5ms (typ.)

Aspect Ratio

1.77 (16:9)

Panel

Display color

8 bit

Audio/Video

Input/Output

Terminals

• HDMI x2

• AV with R/L Audio x1

• VGA with 3.5 mm mini jack x1

• USB for service x1

• Tuner x1

• SPDIF Out X1 (coaxial)

Speaker Out

2X5W (2 channels)

AV Timing

480i/p, 576i

VGA Timing

640 x 400 @ 60Hz, 1680 x 1050 @ 60Hz

800 x 600 @ 60Hz, 1920x1080 @ 60Hz

1024 x 768 @ 60Hz, 1920x1200 @ 60Hz

1280 x 800 @ 60Hz,

1280x1024@ 60Hz

1360 x 768 @ 60Hz

1440 x 900 @ 60Hz

Power Consumption

(Watts)

≤ 90W (@ 19V DC)

Power Consumption

(Standby, Watts)

<1W

English

SPECIFICATIONS

Item

Specification

Dimensions

(WxHxD)

With stand:

1060.56mm x 664.53mm x 173.98mm

Without stand:

1060.56mm x 623.66mm x 53.94mm

Weight (Net)

12.70 Kgs

Physical

Specifications

Weight (Gross)

16.96 Kgs

NOTES:

• These product specifications are subject to change without user notification.

• Do not set your computer graphics card to exceed the unit’s refresh rates; doing

so may cause damage to the LED TV.